DYNACOMP is well-known for 19 years of catalogs containing a diversity of commercial software. We have now added an extensive collection of "user- supported" engineering software from shareware, freeware, and public domain sources. The addition of this 550+ volume collection (over 770 disks) furthers our goal of making the DYNACOMP catalog a vital resource for engineers. In fact, we hope to make the DYNACOMP catalog so valuable that it will always be kept handy!
Remember, you get THE ENTIRE COLLECTION on CDROM. This is not a catalog of software, but the actual programs (we had someone confused about this one time). To be specific, this software originally appeared on over 700 disks. It has been compressed and put on a single CDROM.
Contents:
O 001 3D DRAW & VIEW (3D BLACKBOARD): One disk.
O 002 3D SURFACE DISPLAY: For objects. One disk.
O 003 3D SURFACE MODELLING: Uses given data points, with PASCAL source. Three disks.
O 004 3D STARS (DEEP SPACE): Uses 3D glasses, CGA. Three disks.
O 005 555 TIMER/OSCILLATOR DESIGN I: One disk.
O 006 555 TIMER/OSCILLATOR DESIGN II: Graphics dis- plays. One disk.
O 007 AC/DC CIRCUIT TUTORIAL: Two disks.
O 008 AC/DC NETWORK ANALYSIS I: One disk.
O 009 AC/DC NETWORK ANALYSIS II: One disk.
O 010 ACOUSTICS CALCULATOR: One disk.
O 011 ACTIVE FILTER DESIGN: Op amp-based. One disk.
O 012 AIR DUCT SIZING: Size given flow rate, fric- tion/roughness. One disk.
O 013 AIR FRICTION CHART: For duct/fan sizing. One disk.
O 014 ALARM WIRING TUTORIAL: Pictorial. One disk.
O 015 AMPLIFIER/CLASS A: Vac. tube, bipolar, FET, emitter-follower. Amplitude/phase plots. One disk.
O 016 AMPLIFIER DESIGN (COMMON EMITTER): One disk.
O 017 AMPLIFIER DESIGN (S-PARAMETER): One disk.
O 018 ANALOG CIRCUIT ANALYSIS: One disk.
O 019 ANALOG FILTER (MODULE): For filters & equaliz- ers. Gives amplitude, phase, poles, zeroes, sensi- tivity. One disk.
O 020 ANALOG RESISTANCE CIRCUIT ANALYSIS: One disk.
O 021 ANTENNAE I: Propagation, satellites, parabolic design, etc. One disk.
O 022 ANTENNAE II: Arrays, loading. One disk.
O 023 ARCHITECT OFFICE MANAGER: Two disks.
O 024 ARCHITECTURAL SYMBOLS LIBRARY: AUTOCAD. One disk.
O 025 ASTROFORMCALC: Mole fract., composition, vapor pressure, activities, conductivities, Flory- Huggins formula. One disk.
O 026 AUDIO AMPLIFIER ANALYSIS: Two-stage trouble- shoot. One disk.
O 027 AUTOCAD 3D ARCHITECTURAL BLOCKS: 67 residen- tial. One disk.
O 028 AUTOCAD 3D AUTOMOBILE SCRIPT FILE: One disk.
O 030 AUTOCAD 3D COMMUNICATIONS ROOM: One disk
O 031 AUTOCAD 3D CORVETTE MODEL. One disk.
O 032 AUTOCAD 3D FORK LIFT MODEL. One disk.
O 033 AUTOCAD ANIMATOR UTILITIES: One disk.
O 034 AUTOCAD ANIMATOR: 3D jet, clown, roller coast- er, neighborhood. Four disks.
O 035 AUTOCAD ARCHITECTRURAL OFFICE SYMS: One disk.
O 036 AUTOCAD ARCHITECTURAL (LATICRET): Cer. tile, paving, tile brick. One disk.
O 037 AUTOCAD ARCHITECTURAL BLOCKS: Arrows, furnish- ings, other symbols. One disk.
O 038 AUTOCAD ARCHITECTURAL BLOCKS: Trees, windows, etc. One disk.
O 039 AUTOCAD ARCHITECTURAL LIBRARY DEMO: Matheson Design. One disk.
O 040 AUTOCAD BRICK PATTERNS: One disk.
O 041 AUTOCAD CENSUS BUREAU TIGER MAP: One disk.
O 042 AUTOCAD CONTOURING (QUICKSURF): One disk.
O 043 AUTOCAD DEVICE DRIVERS: For developing custom drivers. One disk.
O 044 AUTOCAD DRAWING COMPONENTS: Three disks.
O 045 AUTOCAD ELECTRONIC SYMBOLS: One disk.
O 046 AUTOCAD FONTS (AUTO FONTS): One disk.
O 047 AUTOCAD HARDWARE NUTS & BOLTS: One disk.
O 048 AUTOCAD HARDWARE TIMING TESTS: One disk.
O 049 AUTOCAD HATCH/CONCRETE PATTERNS: One disk.
O 050 AUTOCAD HIGH RESOLUTION PLOTTING: For IBM Pro- printer. One disk.
O 051 AUTOCAD HIGH SPEED MENU. One disk.
O 052 AUTOCAD LISP LINE JUMPING ROUTINE: One disk.
O 053 AUTOCAD LISP PROGRAM FOR CENTROID, MOMENT OF INERTIA: One disk.
O 054 AUTOCAD LISP PROGRAMS: One disk.
O 055 AUTOCAD LISP SYNTAX CHECKER: One disk.
O 056 AUTOCAD MAPS: U.S., world. One disk.
O 057 AUTOCAD MENU (26MENU): One disk.
O 058 AUTOCAD Nth ORDER GEODESICS: One disk.
O 059 AUTOCAD OIL TANKER DRAWING: One disk.
O 060 AUTOCAD ON-SCREEN MENU: 16 commands. One disk.
O 061 AUTOCAD PLOTTING (FASTPLOT): For HP, Houston Inst., etc. One disk.
O 062 AUTOCAD PLOTTING (PLOTMATE): One disk.
O 063 AUTOCAD PULL-DOWN MENU: One disk.
O 064 AUTOCAD QUICK COMMANDS: Add-ons. One disk.
O 065 AUTOCAD RANDOM DOT PATTERNS. One disk.
O 066 AUTOCAD RENDERING: Creates images with photo- graphic qualities such as texture, translucency, shadows, etc. Generates GIF files, files for ANIMATOR. One disk.
O 067 AUTOCAD RISERS/STAIRS/LANDINGS: One disk.
O 068 AUTOCAD STRUCTURAL SHAPES (BEAM): One disk.
O 069 AUTOCAD STRUCTURAL STEEL SHAPES. One disk.
O 070 AUTOCAD STRUCTURAL STEEL TRUSS: One disk.
O 071 AUTOCAD U.S. MAP: One disk.
O 072 AUTOCAD UTILITIES COLLECTION: One disk.
O 073 AUTOCAD VOLKSWAGEN DRAWING: One disk.
O 074 AUTOCAD 3D BUILDING: With rooms, furniture & equipment. One disk.
O 075 AUTOCAD 3D SLIDE SHOW TUTORIAL: One disk.
O 076 AUTOCAD DOT MATRIX PRINTER (ADIPLOT): Plotter quality. One disk.
O 077 AUTOCAD SHADING (AUTORENDER): Hidden line re- moval, fill, 3D. Four disks.
O 078 AUTOCAD SLIDE FILE MANAGER: Displays drawings w/o AutoCad. One disk. for control & monitoring. Two disks.
O 080 AC CIRCUIT ANALYSIS: R, L, C, bipolar and FET. Plots frequency response. One disk.
O 081 AC CIRCUIT ANALYSIS (PC-ECAP): One disk.
O 082 AC CIRCUIT ANALYSIS (SMALL SIGNAL): One disk.
O 083 AC CIRCUIT ANALYSIS (WINDOWS): Linear, pass- ive/active. One disk.
O 084 AC LIGHTING CIRCUITS: Voltage drops. One disk.
O 085 AC MOTOR TUTORIAL: Transformers, power distri- bution, variable speed. One disk.
O 086 BALLISTICS: Small arms. Two disks.
O 087 BAND PASS FILTERS (INTER-DIGITAL): One disk.
O 088 BCAD: General CAD with fill, text. VGA graph- ics. Epson MX/DeskJet/LaserJet printers. One disk.
O 089 BEAM FORMULAE (ROARK): One disk.
O 090 BEAM FORMULAE (for SYMPHONY): Uses AISC meth- ods. One disk.
O 091 BEAM SPECIFICATION: Uses EI, allowable shear & deflection. One disk.
O 092 BEAMS I: Wood beams w/uniform load. One disk.
O 093 BEAMS II (PC BRIDGE): Continuous beam analysis giving max. deflect., stress and moment. One disk.
O 094 BEAMS III: Handles multi-point, uniform, ramp loads, multiple supports. Plots deflection, shear, moment. Two disks.
O 095 BILL OF MATERIALS: For metal stock, w/weight calculator. One disk.
O 096 BOOLEAN LOGIC: Testing/reduction. One disk.
O 097 CAD (CALCLATE): Math-oriented. One disk.
O 098 CAD (CASCADE DRAW): Two disks.
O 099 CAPACITORS I: Tutorial. One disk.
O 100 CAPACITORS II: Color code values. One disk.
O 101 CAPACITOR LIFE: For Al electrolytic. One disk.
O 102 CENTRIFUGAL PUMP PRESSURE: W/source. One disk.
O 103 CENTROIDS & MOMENTS: For any shape. Includes source code. One disk.
O 104 CENTROID CALCULATOR: Center of mass for non- uniform object. One disk.
O 105 CHEMCALC ELEMENTAL COMPOSITION: Provides ele- mental %, scaled up/down quantities. One disk.
O 106 CHEMCON: Plume dispersion analysis. One disk.
O 107 CHEMFORM: Windows Paintbrush bitmap image li- brary for 2D chemical formulae for import to word processors. One disk.
O 108 CHEMICAL HAZARDS TRACKING: NFPA rating, vol- ume, departments, etc. One disk.
O 109 CHEMICAL MODELLING: MOLECULE for mol. models. CHEMIST for molar concentrations, mol. wts., cen- trifugation. SOLVECHM for composition. One disk.
O 110 CHEMICAL REACTIONS: Also equilibrium thermody- namics. One disk.
O 111 CHEMICAL STOICHIOMETRY: One disk.
O 112 CIRCUIT ANALYSIS (CIRSPICE): One disk.
O 113 CIRCUIT ANALYSIS (TRENTON): AC/DC w/transis- tors & op-amps, w/source. One disk.
O 114 CIRCUIT DESIGN FORMULAE: One disk.
O 115 CIRCULAR PIPE FLANGES: ASME code. One disk.
O 116 CIRC CAD: Circuit CAD. One disk.
O 117 CNC (CAMS-NC): One disk.
O 118 CNC (PERSONAL APT): One disk.
O 119 CNC LINKER: Gets & edits CNC files. One disk.
O 120 CNC-TALKER: Transfer CNC programs to/from CNC machines. One disk.
O 121 CNC CAD/CAM: Cut & paste graphics, editor. RS- 232 output. One disk.
O 123 COMPOSITE PANELS: Calculates stresses/deflec- tions/stiffness/weight/cost for Kevlar/epoxy/- graphite/fiberglas composites. Two disks.
O 124 COMPRESSIBLE GAS FLOW: Isothermal, isentropic, shock, Fanno, Raleigh. One disk.
O 125 CONCRETE BEAM/WALL/SLAB: LOTUS wks. Two disks.
O 126 CONTOUR MAPPING & GRIDDING: For irreg. spaced data. One disk.
O 127 CONTROL CHARTS: Limits calculator. One disk.
O 128 CONTROL SYSTEMS/POWER: 120 programs in BASIC. One disk.
O 129 COOLING TOWER ANALYSIS I: One disk,
O 130 COOLING TOWER II: Multiple unit. One disk.
O 131 COORDINATE GEOMETRY (COGO): For civil engin- eers/ surveyors. One disk.
O 132 CP-290 XA COMMAND INTERPRETER: Sends commands from MSDOS level. One disk.
O 133 CREST CHEMICAL REACTIONS: Uses equil. thermo- dynamics. One disk.
O 134 CRITICAL PATH: Project management. One disk.
O 135 CD CAD: 2D CAD with mouse & digitizer support. CGA/EGA/Hercules graphics. Four disks.
O 136 CD CAD SYMBOLS I: Architecture symbols for CD CAD. Two disks.
O 137 CD CAD SYMBOLS II: Engineering symbols for CD CAD: One disk.
O 138 DANCAD: 2D & 3D CAD w/animated motion display. Supports Epson dot matrix printers. Six disks.
O 139 DANCAM/DANPLOT: 3-axis controller for parallel port stepper/servo signals. Use w/DANCAD. Two disks.
O 140 DATA PLOTTING (EGRAPH): Linear, log, probabil- ity. Up to 32000 data points. One disk.
O 141 DATA PLOTTING (EXPRESSGRAPH): 2D/3D. One disk.
O 142 DATA PLOTTING (MIND CHART): Windows based. Two disks.
O 143 DATA ACQUISITION (ACQUIREX): For use with Ad- vantech, Amplicon, Bede, Cil, Decision, Flytech, United Electronic. Two disks.
O 144 DECISION ANALYSIS: Decision matrix, pair-wise comparison. One disk.
O 145 DELTA-WYE CONVERSIONS: For resistor networks. One disk.
O 146 DIGITAL FILTER CODE GENERATOR: For Model 250 FIR filter, TI TMS320XX DSP's. One disk.
O 147 DIGITAL LOGIC CIRCUITS (TEXAS INST.): Windows based. Three disks.
O 148 DIGITAL CONTROLLER: Freq. response design. One disk.
O 149 DIGITAL FILTER DESIGN: Chebyschev/Butterworth. One disk.
O 150 DIGITAL OSCILLOSCOPE: One disk.
O 151 DIODE DATABASE (PHILIPS): One disk.
O 152 DRAFT CHOICE: CAD with colors, multiple lay- ers. Two disks.
O 153 DRINKING WATER REGULATIONS: Definitions, con- taminant regulations. Four disks.
O 154 DC CIRCUIT ANALYSIS I: DC/LOGIC. One disk.
O 155 DC CIRCUIT ANALYSIS II: One disk.
O 156 DC CIRCUIT ANALYSIS TUTORIAL: Semiconductors, DC circuits, logic. One disk.
O 157 EASYTRAX PC BOARD DESIGN: Full featured. CGA- /EGA/(S)VGA graphics. Supports LaserJet, pen plotters, Gerber, PostScript. Two disks.
O 158 EDRAW: Electronic schematics. Has CGA/EGA/VGA graphics. One disk. DRAW and solid modeller. Four disks.
O 160 EEDRAW: Elect. engineering CAD. Epson/Post- Script compatible. One disk.
O 161 EIGENVALUES: FORTRAN subroutines. One disk.
O 162 ELECRONIC TROUBLE-SHOOTING TUTORIAL: One disk.
O 163 ELECTRIC CALCULATIONS I: Pump horsepower, 3- phase, etc. One disk.
O 164 ELECTRIC CALCULATIONS II: VSWR, decibels, time constants, etc. One disk.
O 165 ELECTRICAL CONTRACTING CALCULATOR I: One disk.
O 166 ELECTRICAL CONTRACTING CALCULATOR II: Wiring sizing, lighting fixtures, power, etc. One disk.
O 167 ELECTRICAL CONTRACTING CALCULATOR III: Wiring sizing, lighting fixtures, power, etc. One disk.
O 168 ELECTRICIAN'S CIRCUIT CALCULATOR: One disk.
O 169 ELECTRICITY TUTORIAL: One disk.
O 170 ELECTRONICS SYMBOLS LIBRARY/AUTOCAD: One disk.
O 171 ELECTRONICS PROGRAMS: In BASIC. One disk.
O 172 ELECTRONIC CAI: Two disks.
O 173 ELECTRONIC CIRCUIT DESIGN (ECD31): One disk.
O 174 ELECTRONIC COLLECTION I: Schematic drawing, IC database, small signal analysis. One disk.
O 175 ELECTRONIC COLLECTION II: Circuit design for multivibrators, zeners, attenuators. One disk.
O 176 ELECTRONIC COLLECTION III: AC circuit analys- is, logic simulator, power distribution, schematic drawing. Three disks.
O 177 ELECTRONIC COLLECTION IV: PPL's, control sys- tems, closed-loop. One disk.
O 178 ELECTRONIC COLLECTION V: Common emitter ampli- fiers, filter design, network analysis, ferrite core coils. One disk.
O 179 ELECTRONIC COLLECTION VI: Microstrips, pi net- works, helical resonators, filters. One disk.
O 180 ELECTRONIC COLLECTION VII: FFT, S-parameter conversion, transmission lines, wave guides, mi- crostrips, etc., w/source. One disk.
O 181 ELECTRONIC COLLECTION VIII: Parameter conver- sion (Z/Y/H/S/A), filters, transient analysis. One disk.
O 182 ELECTRONIC COLLECTION IX: 555 timers, active filters, time series, reliability, electronic cal- culators. Two disks.
O 183 ELECTRONIC COLLECTION X: PPL, active filters, Colpits oscillator, switching regulators, etc. Three disks.
O 184 ELECTRONIC COLLECTION XI: Smith charts, propa- gation, etc. w/source (BASIC). One disk.
O 185 ELECTRONIC DESIGN LIBRARY: Seven disks.
O 186 ELECTRONIC FORMULA CALCULATOR I: One disk.
O 187 ELECTRONIC FORMULA CALCULATOR II: One disk.
O 188 ELECTRONIC FORMULA CALCULATOR III: BASIC pro- grams. One disk.
O 189 ELECTRONIC FORMULA CALCULATOR IV: One disk.
O 190 ELECTRONIC FORMULA CALCULATOR V: One disk.
O 191 ELECTRONIC FORMULA CALCULATOR VI: RF, antenna, conversions. One disk.
O 192 ELECTRONIC FORMULA CALCULATOR VII: Wire size, lighting fixtures, etc. One disk.
O 193 ELECTRONIC FORMULA CALCULATOR VIII: One disk.
O 194 ELECTRONIC FORMULA CALCULATOR IX: One disk.
O 195 ELECTRONIC MATH: Graphs in the complex domain, Laplace transforms, Bode/Nyquist/Argand diagrams, more. One disk.
O 196 ELEMENTARY ELECTRICITY TUTORIAL: One disk.
O 198 ENGINEERING MATHEMATICS I: Probability, relia- bility, Fourier analysis, etc. One disk.
O 199 ENGINEERING MATHEMATICS II: Hi-precision math. One disk.
O 200 ENGINEERING PLOTTING: HP LaserJet. One disk.
O 201 ENGINEERING SURVEYING (SURVEYSOFT): One disk.
O 202 ENGINEERING/SCIENTIFIC LIBRARY: FORTRAN. Two disks.
O 203 ENGINEERING COLLECTION: FFT, transient analy- sis, networks, noise, etc. Two disks.
O 204 ENVIRONMENTAL PRODUCT DATABASE (HOFFMAN ENGIN- EERING): One disk.
O 205 EPA EMISSIONS DEMO: Storage tanks. One disk.
O 206 EPROM PROGRAMMER: Linker for creating binary images from object files. One disk.
O 207 EQUATION PLOT/SOLVE (X SOLUTIONS): One disk.
O 208 EXCEL PERIODIC TABLE: 25 funcs. for each el- ement. One disk.
O 209 FARM FUEL STORAGE: Two disks.
O 210 FAST FOURIER TRANSFORMS: "C" source. One disk.
O 211 FAX SCANNER: Includes schematic to use fax as image scanner and computer printer. One disk.
O 212 FEEDBACK SYSTEM DESIGN: Poles/zeroes, transfer functions. One disk.
O 213 FERRITE CORE DATABASE: One disk.
O 214 FERTILIZER STORAGE & HANDLING: Two disks.
O 215 FFT & IFFT: One disk.
O 216 FILTER DESIGN (ACTIVE CASCADE): One disk.
O 217 FILTER DESIGN (FILTERPRO) Active. Two disks.
O 218 FILTERS (ACTIVE/PASSIVE): Schematics. One disk
O 219 FILTERS (DESIGNER): Butterworth, Chebyschev, Elliptic, etc. One disk.
O 220 FILTER DESIGN: Hi/lo/bandpass. One disk.
O 221 FILTER DESIGN (ACTIVE/PASSIVE): Includes sche- matics. One disk.
O 222 FILTER DESIGN (CHEBYSCHEV): Good. Two disks.
O 223 FILTER DESIGN (EFILTER): Includes schematics. One disk.
O 224 FILTER DESIGN (OP-AMPS): One disk.
O 225 FILTER DESIGN I: Chebyschev/Butterworth to 10 sections, w/source. One disk.
O 226 FILTER DESIGN II: One disk.
O 227 FINITE ELEMENT ANALYSIS I: Structural prob- lems (208). Two disks.
O 228 FINITE ELEMENT ANALYSIS II: For 2D & 3D frames and shells, as well as wood/steel/concrete beams. Stiffness method. One disk.
O 229 FINITE ELEMENT ANALYSIS (ELCUT): Large system for stress, thermal, electrostatic plane par- allel/axisymmetric structures. Four disks.
O 230 FINITE ELEMENT ANALYSIS TUTORIAL (FEMIS): One disk.
O 231 FINITE ELEMENT ANALYSIS (GRAPE 3D): Graphics oriented. Cubic FEA. Four disks.
O 232 FINITE ELEMENT ANALYSIS (MICROSAFE): 2D. Two disks.
O 233 FINITE ELEMENT ANALYSIS: 2D. Includes source code (FORTRAN). One disk.
O 234 FINITE ELEMENT ANALYSIS (HPE): 2D/3D. Three disks.
O 235 FINITE ELEMENT ANALYSIS (SANS/89): Extensive 3D graphical plane/frame/truss analysis with node/element/edge/thermal loading. Static/dynanm- ic/response spectra/p-delta analysis giving stress, deflection and mode shap
O 236 FIRE FIGHTING: Pump pressure, flow, pressure drop. One disk.
O 237 FLOOD FREQUENCY (GEOFREQ): Uses (USGS) Water Supply Paper. One disk.
O 238 FLOOD FREQUENCY (LPS): Uses Log-Pearson Type III. One disk.
O 239 FLOWCALC: Open channel fluid flow. One disk.
O 240 FLOWCHARTING (LOTUS): Worksheets. One disk.
O 241 FLOWMETERS: Bore, dP, flow range based on ISO 5167. One disk.
O 242 FLOWMETER (ISO 5167): Calculates bore, press- ure, flow range. One disk.
O 243 FLUID FLOW (SOLA/SURF): 2D, transient, incom- pressible w/FORTRAN source. One disk.
O 244 FLUID FLOW (TPIPE): Liquid/gas. One disk.
O 245 FORTRAN SCIENTIFIC SUBROUTINES: 350 routines. One disk.
O 246 FRACTIONAL SOLUBILITY: Determine solvent blend for given solubility parameters. One disk.
O 247 FREEZER THERMAL LOG: For tracking temperatures in food/hygiene equipment. One disk.
O 248 FREQUENCY RESPONSE PLOTS (BODE): One disk.
O 249 FREQUENCY ANALYSIS OF DATA: Windows. One disk.
O 250 FUNCTION CURVE FITTING: One disk.
O 251 FUNCTION PLOTTER: Cartesian, polar, paramet- ric. One disk.
O 252 FUNCTION PLOTTING (GNUPLOT): One disk.
O 253 FM STEREO: Simulation of multipath reception, nonlinlearity, filtering, interference. One disk.
O 254 GAGE DESIGN: One disk.
O 255 GAMMACAD: Windows CAD with rotate, snap, copy & paste, zoom, etc. One disk.
O 256 GANNT CHART I: Project scheduler. One disk.
O 257 GANNT CHART II: For large projects, unlimited resources, 1000 phases. One disk.
O 258 GAS ENGINE ELECTRONICS TUTORIAL: Computer mod- ules, EEC diagnosis. One disk.
O 259 GAS WELDING TUTORIAL: One disk.
O 260 GAS CHROMATOGRAPH COLUMN SIMULATION: One disk.
O 261 GC-PREVUE CAD/CAM: 12 colors, 35 layers. Uses Gerber RS-274 NC drill files. Also Excellon, HPGL, Quest, and Sieb Mewer compatible. Supports HPGL and PostScript. One disk.
O 262 GEOGRAPHIC INFORMATION SYSTEM (POLYMAPS): For mapping by state, geographical mapping. One disk.
O 263 GROUNDWATER EDUCATION: Two disks.
O 264 GROUNDWATER PROTECTION, SITE ELEVATION: Two disks
O 265 HARDWARE DESCRIPTION LANGUAGE: Compiler, two- level logic generation for PLD's/ASIC's. One disk.
O 266 HEALTH & DIET BASICS: Three disks.
O 267 HEAT CAPACITIES: For 21 gases. One disk.
O 268 HEAT EXCHANGER TUBESHEET LAYOUT: Creates DXF files. One disk.
O 269 HEAT EXCHANGERS/TUBULAR: Pres. drop. One disk.
O 270 HEAT LOSS (LOTUS): Worksheets. One disk.
O 271 HEAT LOSS, PIPE & TUBE: One disk.
O 272 HEAT LOSS/LOAD: For buildings. One disk.
O 273 HEAT SINK DATABASE: One disk.
O 274 HEATS OF FORMATION: For 18 gases. One disk.
O 275 HELICAL/SPUR GEAR RATING: AGMA. One disk.
O 276 HOME CONTROLLER: Monitor and control alarms, thermostat, etc. One disk.
O 277 HOME PLAN: CAD for house plans. Supports dot matrix/LaserJet printers. One disk.
O 279 HVAC (LE6): 10 zones, ASHRAE. Five disks.
O 280 HVAC BTU ANALYSIS: One disk.
O 281 HVAC LOAD CALCULATIONS (HEATLOAD): One disk.
O 282 HVAC: Sizes HVAC systems using ACCA Manual J methods. One disk.
O 283 HYDRAULICS I: Network flow. One disk.
O 284 HYDRAULICS II: Hardy Cross network fluid flow. One disk.
O 285 HYDRAULICS III: Up to three series & parallel pipes, up to two loops. Outputs are flow rate, pressure loss. One disk.
O 286 HYDRAULIC & GENERAL SCHEMATICS: Based on sym- bol library. DXF in/out. One disk.
O 287 HYDROFLOW: Pump specifications for fluid flow through pipes. One disk.
O 288 HYDRONET: Hardy Cross analysis. One disk.
O 289 HYDROSTATIC BEARING ANALYSIS (LOTUS): One disk
O 290 HYPERSIGNAL DSP: Sends signals to/from disk in real time. Spectrum analyzer, digital oscillo- scope. Two disks.
O 291 HF NETWORK DESIGN (S-PARAMETER): Frequency re- sponse, stability, sensitivity. One disk.
O 292 HP CALCULATOR EMULATOR: HP-11C, HP-12C, HP- 16C. One disk.
O 293 IC DATABASE (ANALOG DEVICES): One disk.
O 294 IC DATABASE (BURR-BROWN): One disk.
O 295 IC DATABASE (MOTOROLA): One disk.
O 296 IC DATABASE (TI): W/spice models. Two disks.
O 297 IC DATABASE (WESTERN DIGITAL): Interface and communications. One disk.
O 298 IMAGE PROCESSING (EYESIGHT): One disk.
O 299 INCOMPRESSIBLE FLUID FLOW DEMO: One disk.
O 300 INCOMPRESSIBLE FLUID FLOW: Hydraulic design. One disk.
O 301 INDUSTRIAL ENGINEERING I: Estimates, capital costs, production floor, etc. One disk.
O 302 INDUSTRIAL ENGINEERING II: MTM, simo charts, facilities management, etc. Eight disks.
O 303 INFRARED SENSOR DESIGN: One disk.
O 304 INSTRUMENT CONTROL: RS-232 & GPIB. One disk.
O 305 INSULATION ECONOMICS (ZIP): Attics, floors and walls, for all U.S. One disk.
O 306 INTERMODULATION: Calculates the intermodula- tion for two input bands. One disk.
O 307 INTERPOLATION/EXTRAPOLATION: Calculates table coefficients. Also differentiation/integration. One disk.
O 308 IC POWER CONSUMPTION: One disk.
O 309 LABTRAC FORMULATION DATABASE: For composition- /fabrication/properties. Two disks.
O 310 LADDER LOGIC (PLUX): Editor, compiler, simula- tor, process controller. One disk.
O 311 LADDER NETWORK DESIGN I: Two disks.
O 312 LADDER NETWORK DESIGN II: Impedance, VSWR, in- sertion loss, phase, etc. One disk.
O 313 LAND SURVEY: Use abstract to produce drawing, area, closure error. One disk.
O 314 LASI PC BOARD DESIGN: General features. EGA, VGA graphics. Supports Epson dot matrix, LaserJet, HPGL. Three disks.
O 315 LAY01 PC BOARD DESIGN: Vector-based. 15 lay- ers, 1/1280" resolution, up to 22"x22". Three disks.
O 316 LEACH BEDS: One disk.
O 317 LEACH FIELD DESIGN (RWASTEII): Grade, back-
O 318 LEAD CONTAMINATION: Drinking water dangers, effects, remediation. Two disks.
O 319 LINEAR AC CIRCUIT ANALYSIS (ACIRAN): Act- ive/passive. One disk.
O 320 LINEAR EQUATIONS (LUDEC): Sols. by decomposi- tion. One disk.
O 321 LINEAR PROGRAMMING (KINETICS): Up to 2000 elements. One disk.
O 322 LINEAR CIRCUIT ANALYSIS: 40 nodes, 200 branch- es. One disk.
O 323 LINEAR CIRCUIT ANALYSIS (ACIRAN): Active/- passive small signal. One disk.
O 324 LOGIC CIRCUIT ANALYSIS: One disk.
O 325 LOGIC SIMULATOR I: One disk.
O 326 LOGIC SIMULATOR II: Extensive system includes bilateral switches, glitches, oscillation, set-up, hold, etc. Three disks.
O 327 LOGIC SIMULATOR III: One disk.
O 328 LOTUS/AS EASY AS: Lotus clone. Lotus file and function compatible. Two disks.
O 329 LOTUS/EARTHCALC: Cut & fill wks. One disk.
O 330 LOTUS ACEBEAM: Beam calculation wks. One disk.
O 331 LOTUS BEAM DEFLECTION: Worksheets. One disk.
O 332 LOTUS ENGINEERING/SCIENTIFIC: Curve fits, in- tegration and differentiation, matrices, pdfs, etc. One disk.
O 333 LOTUS SCIENTIFIC WORKSHEETS: 21 wks. One disk.
O 334 LOTUS THERMAL CALC. WORKSHEETS: One disk.
O 335 LOTUS WARREN TRUSS ANALYSIS: Worksheets for 2- 20 half-panels. One disk.
O 336 LOTUS WORKSHEETS/MACRO LIBRARY: Financial and accounting. One Disk.
O 337 LOUDSPEAKER ROOM FREQUENCY RESPONSE: One disk.
O 338 LSIM: Two-way loudspeaker amplitude/phase sim- ulator plus enclosure designer. One disk.
O 339 MAINTENANCE (STARBURST): PM, statistics, work orders. One disk.
O 340 MANUFACTURING DATABASE (PC MECHANIC): dBASE - PM's, work orders, equip., inventory, employees. One disk.
O 341 MAP DRAWING (VERSAMAP): Outline maps on many projections. Two disks.
O 342 MATH/SCIENCE SYMBOL EDITOR (MATHTEXT):One disk
O 343 MATH/SCIENCE/ENGINEERING LIBRARY: In FORTRAN. Five disks.
O 344 MATHEMATICAL EXPRESSION SOLVER (MERCURY): Sys- tems of equations, roots, w/"C" source. One disk.
O 345 MATRIX LABORATORY (MATLAB): Two disks.
O 346 MATRIX PROCESSOR (MATCALC): For mechanical en- gineering. One disk.
O 347 MECHANICAL SEAL DESIGN: One disk.
O 348 METAL FABRICATION: Bending and flange calcula- tions. Carbon steel heat treatment. One disk.
O 349 METAL FATIGUE: W/FORTRAN source. One disk.
O 350 METAL PLATE BENDING: One disk.
O 351 METALWORKING FABRICATION: Screw thread, mater- ials, cutting tool database. Drilling/countersink- ing. One disk.
O 352 MICROMETER TUTORIAL: One disk.
O 353 MICROWAVE DESIGN TOOLS: Large coll. Two disks.
O 354 MICROWAVE CIRCUIT DESIGN (PUFF): One disk.
O 355 MODELMATE DEMO: 3D solids. Three disks.
O 356 MODULAR ENCLOSURES DATABASE: One disk.
O 357 MOHR'S CIRCLE: Principal/max. stresses, shear stress (any angle). One disk. One disk.
O 359 MOLECULAR MODELING (CHEMICAL/CHEMVIEW): W/EGA animation, 3D. One disk.
O 360 MOLECULAR MODELLING (PCMODEL): Graphics, show- ing structures given atomic coordinates. One disk.
O 361 MOLECULAR WEIGHTS: Compounds. One disk.
O 362 MOS DATABASE (PHILIPS): One disk.
O 363 MOS FET DATABASE (SILICONIX): One disk.
O 364 MR. MACHINIST: CNC file editor, speed/feed & engineering calculator. One disk.
O 365 MULTISIDED BOXES: Optimum angle/dimension for compound cuts. LOTUS/BASIC source code. One disk.
O 366 MULTIVARIATE CURVE FITTING (AMVAC): One disk.
O 367 NASA COSMIC LIST: List 1100 science products. One disk.
O 368 NATIONAL ELECTRIC CODE: Two disks.
O 369 NETWORK ANALYSIS (NET85): One disk.
O 370 NETWORK FLUID FLOW (TPNET): One disk.
O 371 NETWORK ANALYSIS: Nodal, spur, Smith chart, with Pascal source. One disk.
O 372 NOISE FIGURE: For HF. One disk.
O 373 NONLINEAR CURVE FITTING: One disk.
O 374 NONLINEAR PARTIAL DIFFERENTIAL EQUAT. SOLVER: FORTRAN. One disk.
O 375 NONLINEAR DYNAMICS: W/"C" source. Three disks.
O 376 NORTHCAD: 3D CAD with many features. One disk.
O 377 NOTCH FILTERS: In BASIC. One disk.
O 378 OFFICE EQUIPMENT LAYOUT: Graphics layout, in- ventory. One disk.
O 379 OFFICE LAYOUT CAD: W/furniture. One disk.
O 380 OHM'S LAW TUTORIAL: One disk.
O 381 OP-AMP DATABASE (HARRIS): One disk.
O 382 OP-AMP NOISE: One disk.
O 383 OPTOELECTRONICS DATABASE (PHILIPS): One disk.
O 384 ORGANIC ANALYSIS: Simulation of test & meas- urement responses (50). One disk.
O 385 PADS PC BOARD DESIGN: Design/layout/schematic capture, component library. Three disks.
O 386 PANEL DATABASE: Circuit/mother board data. One disk.
O 387 PARTFILL: Irrigation/drain flow. Calculates flow rate, depth, velocity, critical velocity, critical depth. Manning/Kutter eqns. One disk.
O 388 PARTIAL DIFFERENTIAL EQUATIONS: LaPlace meth- od. One disk.
O 389 PASCAL SCIENTIFIC/ENGINEERING: Over 200 pro- grams One disk.
O 390 PASSIVE CIRCUIT ANALYSIS: One disk.
O 391 PASSIVE CROSSOVER DESIGNER: Windows. Two disks
O 392 PATTERN OPTIMIZER: For minimizing pattern cut- ting wastes. One disk.
O 393 PC REPAIRS: PS, memory, motherboard. One disk.
O 394 PC-DOGS: Full featured CAD. Outputs AutoCAD DXF files. Ten disks.
O 395 PC-DRAFT CAD: CAD w/multiple layers, auto di- mensioning. EGA/(S)VGA/Hercules compatible. Dot matrix, DeskJet, LaserJet, HPGL. One disk.
O 396 PC-KEY/DRAW: CAD with paint. Also creates GW- BASIC code for images. Two disks.
O 397 PC-SCHEMATICS: CAD for electronic schematics & pc boards. One disk.
O 398 PC-TRACE: 2-sided pc board design w/autorout- ing, schematic capture. AutoCAD SCR file output. Epson dot matrix & LaserJet compatible. Two disks.
O 399 PCB LAYOUT (PUFF): One disk. source code. EGA/VGA graphics. Supports LaserJet II. Two disks.
O 401 PERIODIC TABLE (INTEGRAL SCIENTIST): 50 facts per element, with test. Also chemical solutions/- units conversion calculators. One disk.
O 402 PESTICIDE STORAGE & HANDLING: Two disks.
O 403 PHASE LOCKED LOOP ANALYSIS I: HCMOS, w/Bode plots. One disk.
O 404 PHASE LOCKED LOOP ANALYSIS II (DLCAS): Circuit design/simulation. One disk.
O 405 PIPEDROP: Pressure drop for fluids and air in pipes. One disk.
O 406 PLANAR MECHANISMS: Kinematic/dynamic analysis. One disk.
O 407 PLANE FRAME ANALYSIS: Like PLANE FRAME & TRUSS ANALYSIS. One disk.
O 408 PLANE FRAME & TRUSS ANALYSIS: Handles point & uniform/triangular distributed loads. Also pres- sure vessel wall thickness analysis. One disk.
O 409 PLATE VIBRATION: Stress, strain, resonance. One disk.
O 410 PLOTTING (XYPLOT): In BASIC. One disk.
O 411 POLLUTION PREVENTION: Nine disks.
O 412 POLYNOMIAL CURVE FITTING I: Fits to normal and rational polynomials. One disk.
O 413 POLYNOMIAL CURVE FITTING II: One disk.
O 414 POLYNOMIAL SOLUTIONS (DLANET): For polynomials & circuits. One disk.
O 415 POWER CADD: Eng. & scientific CAD. Two disks.
O 416 POWER SUPPLY DESIGN: Linear. One disk.
O 417 PPL DESIGN: High speed CMOS. One disk.
O 418 PRESSURE VESSEL DESIGN DEMO: One disk.
O 419 PRESSURE VESSEL STRESS: One disk.
O 420 PREVENTIVE MAINTENANCE: Work orders, PM re- cords. One disk.
O 421 PRINTCAD: 3D CAD with mouse, pull-down menus. Epson, HPGP, HPGL printers supported. Two disks.
O 422 PROCESS ENGINEERING DEMO: Heat transfer, fluid flow. One disk.
O 423 PROGRAMMER'S CALCULATOR: Binary/octal/decimal- /hex conversion, math calculator. One disk.
O 424 PROJECT MANAGEMENT: Windows based. Includes ACTOR source. One disk.
O 425 PROTOCAD: 3D CAD w/plane, isometric, perspect- ive views. One disk.
O 426 PSPICE MACROMODELS (BURR-BROWN): One disk.
O 427 PSTRAN STRUCTURAL ANALYSIS: 2D/3D. Two disks.
O 428 PUMP CALCULATIONS: One disk.
O 429 PC BOARD DESIGN: With autorouting. Includes C source code. One disk.
O 430 PC BOARD EGA: Includes autorouting. One disk.
O 431 QUICKROUTE: 8-layer printed circuit board de- sign. Epson printer output. One disk.
O 432 RADIATION PLUME DISPERSION: Pressurized/boil- ing water reactors. One disk.
O 433 RADIATION SPECTRA: Graph and modify alpha and gamma data. One disk.
O 434 RAY TRACING RENDERING: One disk.
O 435 REGRESSION, INTEGRATION, CURVE FITTING: One disk.
O 436 REINFORCED CONCRETE BEAMS: Encased, cantilev- er, and knife-edge end supports for T, inverted L, rectangular sections. One disk.
O 437 RESISTOR CALCULATOR: One disk.
O 438 RF AMPLIFIERS DATABASE (Q-BIT): One disk. lines, op-amps, S/N, intermodulation. One disk.
O 440 RF COMMUNICATIONS: Smith chart, propagation. One disk.
O 441 RF INTERFERENCE: Helps to locate RF interfer- ence sources. One disk.
O 442 RF/MICROWAVE CIRCUIT DESIGN (APPCAD): For HP semiconductors. Three disks.
O 443 RMG ORCAD: ORCAD pc board utilities. One disk.
O 444 ROAD ENGINEERING/CURVE DESIGN: One disk.
O 445 ROAD SURVEY: Centerline coords. for survey. One disk.
O 446 ROBOTIC CONTROL (RCCL): 250 routines in "C". Two disks.
O 447 ROCKETS & HOT AIR BALLOONS: One disk.
O 448 ROLLED SHAPES DATABASE (ASIC): Use with Wind- ows. One disk.
O 449 ROMBERG INTEGRATION: One disk.
O 450 ROOT-LOCUS PLOTTING: One disk.
O 451 ROOTS: Complex roots of a poly. One disk.
O 452 ROTATION CALCULATIONS: CAM design w/8 motions, propeller design. One disk.
O 453 RF CIRCUIT ANALYSIS: 20-1000 MHz. One disk.
O 454 RF ENGINEERING DESIGN: Six disks.
O 455 RF ENGINEERING DESIGN (DAVID): Four disks.
O 456 SCH-DRAW: Analog/digital schematics. One disk.
O 457 SCHEMATIC DRAWING: VGA, LaserJet. One disk.
O 458 SCHEMATIC DRAWING (AUTOSKEM): One disk.
O 459 SCHEMATIC DRAWING & PCB ARTWORK (PC-SCHEMAT- ICS): One disk.
O 460 SCHEMA DEMO: One disk.
O 461 SCIENTIFIC EQUATION SOLVER (SCIEQS): One disk.
O 462 SCIENTIFIC CALCULATOR: matrices, trig. funcs., formulae. One disk.
O 463 SD-LMP: Two-way loudspeaker amplitude, phase simulator plus room placement. One disk.
O 464 SECTION PROPERTIES: Provides section modulii, radii of gyration, area for section bounded by line segments. One disk.
O 465 SEISMOGRAPH SIMULATIONS: One disk.
O 466 SEMICONDUCTOR CROSS REFERENCE: Six disks.
O 467 SEMICONDUCTOR DATABASE (SGS - THOMPSON): One disk.
O 468 SEWER FACILITIES PLANNING: For small communit- ies w/o sewers. Thirteen disks.
O 469 SHEET CUTTING OPTIMIZATION: Minimizes cutting wastes. One disk.
O 470 SIGNAL PROCESSING CALCULATOR: One disk.
O 471 SIMULATION (SIMON): Mathematical modelling and simulation. One disk.
O 472 SIMULTANEOUS LINEAR EQUATION SOLVER (LINPACK): Two disks.
O 473 SMITH CHARTS: RF design. One disk.
O 474 SMITH CHART: HF transmission lines. One disk.
O 475 SOIL EROSION CONTROL: Eight disks.
O 476 SPACE FRAMES: 3D analysis. One disk.
O 477 SPECTRUM ANALYSIS/FIR FILTER DESIGN. W/source. One disk.
O 478 SPECTRUM ANALYSIS: One disk.
O 479 SPICE CIRCUIT ANALYSIS (PSPICE): Three disks.
O 480 SPICE MODEL LIBRARY (PSPICE): Harris op-amps. One disk.
O 481 SPICE MODEL LIBRARY (PSPICE): One disk.
O 482 SPIRAL INDUCTORS: One disk.
O 483 SPROCKET DESIGN: One disk.
O 484 STATISTICAL PROCESS CONTROL I: CGA/EGA/Herc-
O 485 STATISTICAL PROCESS CONTROL II: Determine con- trol limits. One disk.
O 486 STATISTICAL PROCESS CONTROL III: System for inspection records, defect tracking. Two disks.
O 487 STEAM PROPERTIES I: One disk.
O 488 STEAM PROPERTIES II: Thermodynamic & transport properties for turbines & pumps. One disk.
O 489 STEAM TABLES (ASME): FORTRAN subroutine. One disk.
O 490 STEAM TURBINE ENGINEERING: One disk.
O 491 STEAM TURBINE PERFORMANCE: One disk.
O 492 STEEL BEARING PLATE SIZING (BEAR): AISC meth- ods. One disk.
O 493 STEEL PLATE GIRDERS: Design/analysis. One disk
O 494 STEREO: Use parallel port for 8-bit sound with sound card. One disk.
O 495 STORM WATER DETENTION DESIGN & ANALYSIS: One disk.
O 496 STRENGTH OF MATERIALS: Statics analysis giving section modulus, shear & moment diagrams.
O 497 STRUCTURAL ANALYSIS: LOTUS wks. One disk.
O 498 SUNSETCAD: Windows based CAD. One disk.
O 499 SUPERBEAM: Determines economical wood & steel beam sizes. One disk.
O 500 SURFACE WATER MANAGEMENT: Eight disks.
O 501 SURVEY DATA PREPARATION: For Generic CADD; in- cludes transverse, sideshot, etc. One disk.
O 502 SURVEYING: Personal use. One disk.
O 503 SWITCHING POWER SUPPLY EXPERT SYSTEM: Boost- /multi-output flyback regulators (LM2577) & buck- /buckboost (LM2575). One disk.
O 504 SYMBOLIC EQUATIONS REDUCTION: Two disks.
O 505 TEKTRONIX 4662 PLOTTER DRIVER: HP plot files. One disk.
O 506 TEMPERATURE SENSOR HANDBOOK (RdF): Two disks.
O 507 TESLA COIL DESIGNER: One disk.
O 508 THERMAL CONDUCTIVITIES: 21 gases. One disk.
O 509 THERMAL PROPERTIES DATABASE: One disk.
O 510 THERMAL INSULATION TABLES: LOTUS worksheets. One disk.
O 511 THERMOCHEMICAL DATABASE (ARMED FORCES): 1800 chemicals. One disk.
O 512 THERMOCOUPLE CALCULATIONS: T/V, V/T. One disk.
O 513 THERMODYNAMIC & TRANSPORT PROPERTIES (FEAST): One disk.
O 514 THERMODYNAMICS PROBLEMS: One disk.
O 515 THERMODYNAMIC PROPS. NBS/Fluids. Two disks.
O 516 THERMOPHYSICAL PROPERTIES: Water & steam, 35 properties, 0-800 Centigrade. One disk.
O 517 TIME & MOTION STUDIES: One disk.
O 518 TIME SERIES PATTERN ANALYSIS: One disk.
O 519 TK SOLVER: Freeware version. One disk.
O 520 TOMMY CAD: Windows based CAD. Four disks.
O 521 TORSION: Calculates max./min. stress, stress at critical points, pure/warping shear in open steel sections. One disk.
O 522 TRANSFORMER/INDUCTOR DESIGN: Four disks.
O 523 TRANSISTOR DATABASE (PHILIPS): One disk.
O 524 TRANSISTOR AMPLIFIER DESIGN: One disk.
O 525 TRANSISTOR AMP. DESIGN (CE-AMPS): One disk.
O 526 TRANSISTOR S-PARAMETERS (SCAT): Smith chart, high frequency RF amplifiers. One disk.
O 527 TRIANGLE/SCIENTIFIC CALCULATOR: One disk.
O 528 TRIMPOT DATABASE: One disk.
O 529 TSR CALCULATORS: Algebraic, scientific, fi-
O 530 TUNED CIRCUITS: Resonance/inductor design. One disk.
O 531 TURBODRAW: CGA/EGA compatible CAD. One disk.
O 532 TURBODRAW: Full CAD system with symbol librar- ies, AutoCAD DXF file compatible. Supports same printers and graphics as PC-DRAFT CAD. One disk.
O 533 UNITS CONVERSION I: Metric to/from English fol- lowing ANSI/IEEE. One disk.
O 534 UNITS CONVERSION II: One disk.
O 535 UNITS CONVERSION III: One disk.
O 536 UNITS CONVERSION IV: Windows. Two disks.
O 537 UNITS CONVERSION V: Multiplan. One disk.
O 538 UNITS CONVERSION VI: Metric/English for vibra- tion analysis. One disk.
O 539 UNITS CONVERSION VII: TSR. One disk.
O 540 UNITS CONVERSION VIII: One disk.
O 541 UNIVERSAL INTERFACE CARD: Source code (C and assembly) and construction info. One disk.
O 542 VGACAD: CAD with curve smoothing, zoom, cut & paste, color, etc. (S)VGA compatible. One disk.
O 543 VIBRATING/ROTATING/COOLING SURFACES: One disk.
O 544 VISCOSITIES: 21 saturated liquids. One disk.
O 545 WASTE TREATMENT/ON SITE: For septic systems, mounds, leach fields. Three disks.
O 546 WATER CONSERVATION TECHNIQUES: Four disks.
O 547 WATER PROPERTIES: Thermodynamic/transport for two-phase, superheated, supercooled, critical, supercritical. One disk.
O 548 WATER SYSTEM DESIGN: Private wells and piping. Eight disks.
O 549 WATER-EFFICIENT LANDSCAPING: Three disks.
O 550 WAVEFORM SIGNAL ANALYSIS: One disk.
O 551 WELDED JOINTS: Calculates stresses for Jenn- ings joint types, w/source. One disk.
O 552 WELD STRESS: Standard/defined welds. One disk.
O 553 WETLANDS EDUCATION: Seven disks.
O 554 WINBEAM BEAM ANALYSIS: Calculates deflection & rotation, stress & moment for beams with fixed/pinned supports, uniform loads, point loads & moments, springs. One disk.
O 555 WIRE SIZE CALCULATOR: One disk.
O 556 WOOD BEAMS: Follows Uniform Building Code. Two disks.
O 557 WOOD COLUMNS: One disk.
Price: $149.95